Tungsten Carbide Hole Saw Kit 9 Pce Concrete Ceramic Tile Marble Slate Brick MDF

Description

Thanks for Stopping, Everything Ships from Florida in USA or Irvine Scotland if in UK
Sign up for my email newsletters
by adding my eBay Store to your Favorites
These Tungsten Carbide Grit Edge
Serrated Holesaws are a True Professionals Tool
They are the exact same product we Wholesale Worldwide to Tile Stores and Hardware Stores under either our name, there name or various product names so be assured you are getting the same Quality Product Here that we sell everywhere.
This Hole Saw Kit Covers all the Hole Saws that fit the Smaller Mandrel / Arbor up to and including 1 1/8" 29mm
9 Pce Small Tungsten Carbide Grit Edge Holesaw Kit
with carrying case
.
Set Comprises of 1 Regular Mandrel / Arbor for Smaller Hole Saws with TCT Pilot Drill, 1 SDS  Mandrel / Arbor for Smaller Hole Saws with TCT Pilot Dril, 1 Spare TCT Pilot Drill, One of Each Holesaws - 5/8" (16mm), 3/4" (19mm), 7/8" (22mm), 1" (25mm), 1 1/16" (27mm), 1 1/8" (29mm).
Other items available for use with this hole saw Kit include 12" Mandrel Extension for Deep Bore Holes and Replacement TCT Pilot Drills.
Click Here to See Mandrels / Arbors in Our Store
We have many more sizes of Tile Drills and Hole Saws available in Our Ebay Store from 1/4" (6mm) to 6" (152mm)
The Gulleted Edge is coated with a Permanently Bonded Tungsten Carbide Grit. The Gulleted Edge increases cutting pressure and allows the cut material to be removed .They are designed to take serious abuse and will outlast any conventional Hole Saw, they can be used in corded or cordless Drills and even SDS Drills and are built and designed to cut both with or without Full Hammer Action. They can even cut in both directions, they have a high heat and abrasion resistance, they are much tougher than Bi Metal Hole Saws and they have no teeth to chip or dull like Regular and even Carbide Tipped Hole Saws.
These Holesaws leave a fine finish and can cut through tough abrasive materials like Brick, Masonry, Slate, Marble, Ceramic Wall Tiles, Siding, Hardie Board, Construction Materials such as Autoclaved Cement Board, Fibre Glass, Composite Boards such as Chipboard and MDF, Laminates, Rubber Tires Tyres, GRP, CFRP, Hardwood Flooring, Laminate Flooring, Plasterboard / Drywall, Soft Resinous Woods and Hard Brittle Materials. Great for Boat Building.
Blades Can be reversed and wire brushed clean to increase life span.
Applying water to the cutting edge whilst running
with squirty bottle will minimize dust and
keep the cutting tool cool and increase the life span of the cutting edge.
Important
Keep Water and fluids away from Electrical Tools and Devices!!!
Always wear Safety Glasses when Using Any Tool
Many of the applications that these saw blades are used for would bind and load up, or wear out the teeth on traditional toothed blades.
These Tungsten Carbide Grit edge HoleSaws are currently available in Kits and individually in a wide range of sizes as follows.
If there is a size you are looking for please let us know maybe its one we have in stock or one we should have in stock
Other Sizes We carry in the Tungsten Carbide Grit Range -
Check Our Ebay Store
5/8" (16mm), 3/4" (19mm), 7/8" (22mm), 1" (25mm), 1 1/16" (27mm), 1 1/8" (29mm), 1 1/4" (32mm), 1 3/8" (35mm), 1 1/2" (38mm), 1 5/8" (41mm), 1 3/4" (44mm), 1 7/8" (48mm), 2" (51mm), 2 1/8" (54mm), 2 1/4" (57mm), 2 3/8" (60mm), 2 1/2" (64mm), 2 5/8" (67mm), 2 3/4" (70mm), 2 7/8" (73mm), 3" (76mm), 3 1/4" (83mm), 3 3/8" (86mm), 3 1/2" (89mm), 3 3/4" (95mm), 4" (102mm), 4 1/2" (114mm) & even a whopping 6" (150mm).
The Hole Saws in this kit will fit any standard 1/2” thread Mandrel / Arbor But our A1 & A1 SDS Mandrels are fitted with a TCT Pilot Drill for Drilling Holes in Masonry and Tile etc., we also have Special 5/16" (7.5mm) TCT Spear Point Drills that double as Pilot Drills for these Mandrels in our store for better centering when cutting Holes in Ceramic Tile - All available in our Mandrel / Arbor section.
Always use Pilots that are TCT (Tungsten Carbide Tipped)  After All What’s the point having a Hole Saw that can cut through Brick and Tile if the Pilot Drill Cannot?
Questions and Answers
Q: What is an Arbor / Mandrel?
A: Some people call it a Mandrel and some call it an Arbor, this is the device that you put in your Electric Drill and the Hole Saw attaches onto it, it has a Pilot Drill that starts drilling before the Hole Saw reaches the material in order to center it and steady it, Pilot Drills are usually HSS High Speed Steel Not Ours though, we have 2 Types , we have TCT Tungsten Carbide Tipped which looks like a regular Drill but there is a Piece of Solid Tungsten carbide in a Pentagon shape slotted and welded into the point, this allows it to be used with or without a Hammer Drill and cut through tougher materials like Brick, we also have Spear Point Tile Drill Pilots- these are unlike any other drill they have a solid Spear shaped large piece of Tungsten carbide slotted into the point, they are specially for cutting through Tile or Glass as they slowly expand the hole as they drill exerting smaller amounts of pressure than a regular Pilot Drill making them suitable for brittle materials like Ceramic Tile & Glass etc.
Q: Which Mandrel / Arbor do I need ?
A: For this size Hole Saw and any Holesaw 1 1/8" (29mm) or less you need what we call an A1 or A1 SDS Arbor / Mandrel, it has a thread size of 1/2" which is a standard size this will also fit any other hole saw you own or buy in the future whether its one of ours or not, we have a few options the first consideration is the type of Electric Drill, if its a regular Drill with a regular chuck then the regular A1 TCT Mandrel / Arbor is fine - This has a TCT Pilot Drill which is replaceable and it has a 3/8" Hex Shaft for gripping in your Drill, if you are Drilling Tile though you may want to get a Spear Point 7.5mm Tile Drill and it will fit any of our Mandrels / Arbors Both 3/8" Hex shaft and SDS.
If you have an SDS Plus Drill then we have SDS Mandrels also - This also has a TCT Pilot Drill which is replaceable but instead of having a 3/8" Hex Shaft it has an SDS Plus shaft for gripping in your Drill, the Mandrel / Arbors have slots milled into the spline to enable them to slide into an SDS Drill chuck for quick Drill changes.
Don't worry though If you dont know what SDS is - You have not got one!!
Q : Are the Pilot drills Replaceable?
A: Yes all TCT Pilot Drills and Spear Point Pilot Drills are replaceable, by means of a hex screw and replacements are always available here in our Store.
Q : What if I want to Drill a Hole Deeper than the height of the Hole Saw?
A: Simple - go to our Ebay Store and purchase the Mandrel / Arbor Extenion, this fits onto the 3/8" Hex shaft of our A1 and A2 Mandrels , then you drill as far as you can, remove the hole saw from the hole and break out the core then just keep doing the same thing until you are through.
Q: How Long will the Hole saw last?
A: We expect to get 30-40 holes at least out of each Hole saw, obviously depending on the material and how you look after the tool, but don't worry if you do manage to wear them out completely we always have product in stock so even on the hole saw kits you do not have to replace the whole kits we sell all sizes individually.
A couple of tips to get the best out of the blades, some of these are obvious but you would be surprised.
1. Always double check the Pilot Drill is firm and tight and check it with a Hex / Allen Key - if it spins you will obviously just sit in the same place grinding the grit off the hole saw.
2. If Drilling Masonry items like Brick and Concrete always use the Hammer Drill Setting so it clears the debris from the hole. Keep the hole saw as cool as you can by dipping in water and allowing it to cool between uses.
3. If drilling Deep Holes - break the core out as you go or you wont get anywhere.
4. Screw the hole saw down as tight onto the threads as possible and lock the pins in place all the way in on the larger mandrels. Keep an eye on the locking pins so they do not back off with the vibration etc, the pins are not designed to be used extended that will put a huge pressure on them and may cause them to snap.
I use a rubber band placed behind the locking wheel - this prevents it backing off if I am not watchng etc.
Q: Will Tungsten Carbide Cut High Density Ceramic, Porcelain and Granite ?
A: No but our Diamond Range will cut Porcelains Granites and High Density Floor Tiles.
Click Here to go to Our Diamond Hole Saw Range
So Who uses our Tungsten Carbide Hole Saws and other Saw Blades?
Plumbers, Electricians HVAC Engineers and Installers, Boat Builders, Professionals DIY and Remodellers, Tile Installers, Construction Workers, Engineers, , Air Conditioning Engineers, Kitchen Fitters, Masons, Composite Manufacturers and users such as Fiberglass and Auto Body Kit Manufacturers, Component Testers, Aerospace Industry, Graphite Industry,Insulation Manufacturers, Woodworking, Fire Brigades, Computer Case Modification.
Thanks for looking and Please check our Ebay Store we have Many other Amazing Products
Jigsaw Blades, Reciprocating Saw Blades, Mandrels / Arbors, Rod Saw Blades, Hacksaw Blades, The Amazing Tile & Glass Cutter
,
Super High Quality Tile & Glass Drills,
Grout Rake, Tungsten Grit File, High Quality Diamond Hole Saws, Tungsten Carbide Hole Saws
Visit My eBay Store: Another Amazing Product
Sign up for my email newsletters
by adding my eBay Store to your Favorites.