180mm Diamond Core Drill For Concrete Wall Diamond Drill With Water Source 2000W

Description

180mm
Diamond Core Drill For Concrete Wall
Diamond Drill With Water Source (hand-held) 2000W  Electric Drill (No Water Seal)
PRODUCT DESCRIPTION
Z1Z-FF02-180 180mm Diamond Drill With Water Source(hand-held)
1. This machine is equipped with electric current protection switch, when at or exceeding the limits
of current motor, electric opportunity to prompt the operator, abnormal fluctuations decrease after load,
electricity chance to return to normal work, if you don't reduce load, electric opportunity automatically
shut down, reopen button can be normal operation,
2. No water seal design.Avoid the replacement of water seal.
INTRUDUCTION
Diamond drill with water source is used for the punch and engineering samples in the
construction and installation, municipal engineering, strengthening works, gas, heating,
ventilation, chemical pipe laying, installation of air-condition equipment, and the construction
of roads and bridges guardrail.
TECHNICAL PARAMETERS
Rated voltage (V) : 220V
Rated frequency (Hz) : 50hz
Rated input power (W) : 2000
No-load speed (r/min) : 1900
Max. Drilling hole diameter (mm) : 180mm
Net weight (Kg) : 6.2kg
PRODUCT DESCRIPTION Z1Z-FF02-180 180mm Diamond Drill With Water Source(hand-held) 1. This machine is equipped with electric current protection switch, when at or exceeding the limits of current motor, electric opportunity to prompt the operator, abnormal fluctuations decrease after load, electricity chance to return to normal work, if you don't reduce load, electric opportunity automatically shut down, reopen button can be normal operation, 2. No water seal design.Avoid the replacement of water seal. TECHNICAL PARAMETERS Rated voltage (V) : 220V Rated frequency (Hz) : 50hz Rated input power (W) : 2000 No-load speed (r/min) : 1900 Max. Drilling hole diameter (mm) : 180mm Net weight (Kg) : 6.2kg