16 port POE injector, 48 volt rackmount

Description

Add PoE to any Switch - Rack Mounted PoE injector
• Extend power to 328 ft or 100 meters
Features
• 16 shielded RJ45 jacks with Data + Power out
• power per port limited to 650 ma by self resetting fuses per port
• 16 shielded RJ45 jacks for data to your switch
• 2.1mm x 5.5mm DC input power jack
• Alternate screw terminal power input block
• use both inputs for failover applications ( internal diode bridge )
• LED power status
• 10/100 operation ( see the WS-GPOE for gigabit)
• note: if your switch AND your IP phone are both gigabit - it will NOT work with this device
• includes 48 volt 120 watt power supply
Used to provide PoE power to:
• IP phones like Polycom, Cisco, Yealink
• WiFi Access points
• IP Cameras
• 802.3af devices
Two power supply inputs
• Mode B. provides power on the data lines 4 and 5, and 7 and 8. This is supported by all 802.3af compatible devices
• All devices receive the same voltage - choose a power supply with more available power than the total of all devices.
• This device provides power on the spare data wires in the ethernet cable. 120 Watts is available at 48 volts
• Check device specs for power needs, it is under 4 watts for most Phones, other devices need more
• We offer 24v, 48v and 56v supplies, with 60 and 120 watt versions,
• Connect 2 power supplies for redundant operation or higher power.
LED status show power for all 12 ports
Other products from WiFi-Texas
• see also our 10/100/1000 and wall mount versions and switches
• WS-POES-8-7-48v60w 8 ports with integrated switch
• WS-GPOE-16-48v120w for 10/100/1000 speed data
• WS-GPOE-12-48v120w for fewer ports
• WS-GPOE-16-48v240w for 10/100/1000 speeds and high power
• WS-PoE-Tester to display power used by a device
• Full details and data sheet at http://poe-texas.com/